FACADE ESTIMATING, LLC

Miami-Dade & HVHZ glazing estimating

The toughest glazing code in the country, priced right the first time.

South Florida glazing isn't priced from the elevations alone. In the High-Velocity Hurricane Zone, Miami-Dade and Broward counties, the Florida Building Code requires exterior glazing that has passed Miami-Dade's own impact and pressure testing. The product has to carry a current Notice of Acceptance. One wrong assumption about a frame, a glass make-up or an anchor can put a bid out of compliance before it's submitted. We check every opening before we price it.

Send Project Drawings Meet with Facade

What we check on every HVHZ bid

Every opening priced against its Notice of Acceptance.

In Miami-Dade and Broward, every exterior window, door and curtain wall system has to carry a Miami-Dade NOA and be installed exactly as that NOA shows. Your number reflects what will actually pass inspection.

A current NOA for every system

The approval has to match the product being priced and be current at bid time.

Sizes & pressures within the approval

Each opening's width, height and design pressure has to fall inside what the NOA allows. Oversized openings and high-pressure corner zones are where bids go wrong.

Glass make-ups

We price the laminated and insulated glass the NOA specifies, not a generic make-up.

Anchorage & substrate

Anchor type, spacing, edge distance and substrate drive installation cost, and they all come from the approval.

Impact entrances & hardware

Doors, sliders and their hardware sets have to be approved together.

Engineering & submittals

We account for the sealed shop drawings and calculations HVHZ projects require.

Beyond South Florida

Miami-Dade standards, wherever they're specified.

Miami-Dade approvals and high-velocity hurricane testing are increasingly specified on coastal projects outside Florida. We price those bids to the same standard we use in Miami-Dade.

Facade Estimating is based in Tampa and estimates glass and glazing projects for contractors nationwide. Florida glazing estimating →

HVHZ Expertise

From oceanfront towers to impact storefronts.

Condominium towers, hotels, office and mixed-use buildings, retail, schools and healthcare in Miami-Dade and Broward, priced with the manufacturers and suppliers you choose.

Scott Ward has worked in commercial glazing since 1982 and is a Florida Certified General Contractor. Aaron Michie has led estimating departments for glazing and construction contractors in Tampa, Miami and Palm Beach County. Meet the team →

Unitized Curtain Wall
Stick-Built Curtain Wall
Impact Windows & Window Wall
Impact Storefront & Entrances
Impact Sliding Glass Doors
Glass Handrails & Windscreens

Questions we hear

Miami-Dade & HVHZ glazing FAQ

What is the Miami-Dade hurricane code for glazing?

In the High-Velocity Hurricane Zone, Miami-Dade and Broward counties, the Florida Building Code requires exterior windows, doors, storefront and curtain wall to pass Miami-Dade's testing protocols for impact, wind pressure and water. Approved products carry a Miami-Dade Notice of Acceptance (NOA), and the installation has to follow it.

What is a Miami-Dade NOA?

A Notice of Acceptance is Miami-Dade County's product approval. It lists the sizes, design pressures, glass make-ups and anchorage a product is approved for. If an opening falls outside the NOA, that product can't be used there as drawn.

How is a Miami-Dade NOA different from Florida Product Approval?

Florida Product Approval (an FL number) covers products used outside the HVHZ. In Miami-Dade and Broward, products need a Miami-Dade NOA. The two approvals can list different maximum sizes, design pressures and glass make-ups for the same system, so the approval you price against changes the frame, the glass and the number.

Does Miami-Dade approval matter outside South Florida?

Increasingly, yes. Miami-Dade approvals and high-velocity hurricane testing are often specified on coastal projects outside Florida. We price those bids to the same standard we use in Miami-Dade.

What do you need from us to price an HVHZ glazing bid?

The architectural drawings, the specifications, any addenda and your bid date. Structural drawings or a components and cladding (C&C) pressure table help too. We review the set, meet with your team and agree on a per-project fee before any work starts. Send project drawings →

Bidding a project in Miami-Dade or Broward?

Send us the drawings and we'll price it to the code it will be inspected against. Or call us at 813-376-5984.

Send Project DrawingsMeet with Facade